Manufacture	ABB
Item No	DO810
Article number	3BSE008510R1
Series	800XA Control Systems
Origin	Sweden
Dimension	127*51*102(mm)
Weight	0.2kg
Customs Tariff Number	85389091
Type	Digital Outputt Module

 ABB DO810 3BSE008510R1 Digital Output 24V 16 Ch This module has 16 digital outputs. The output voltage range is 10 to 30 volt and the maximum continuous output current is 0.5 A. The outputs are protected against short circuits, over voltage and over temperature. The outputs are divided into two individually isolated groups with eight output channels and one voltage supervision input in each group. Each output channel consists of a short circuit and over temperature protected high side driver, EMC protection components, inductive load suppression, output state indication LED and optical isolation barrier. The process voltage supervision input give channel error signals if the voltage disappears. The error signal can be read through the ModuleBus. The outputs are current limited and protected against over temperature. If the outputs are overloaded the output current will be limited.Detailed data: Isolation Grouped and ground isolated Output load < 0.4 Ω Current limiting Short-circuit protected current-limited output Maximum field cable length 600 m (656 yd) Rated insulation voltage 50 V Dielectric test voltage 500 V AC Power dissipation Typical 2.1 W Current consumption +5 V Modulebus 80 mA Environment and certifications: Electrical safety EN 61010-1, UL 61010-1, EN 61010-2-201, UL 61010-2-201 Hazardous locations C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2 Marine certifications ABS, BV, DNV, LR Operating temperature 0 to +55 °C (+32 to +131 °F), certified for +5 to +55 °C Storage temperature -40 to +70 °C (-40 to +158 °F) Pollution degree 2, IEC 60664-1 Corrosion protection ISA-S71.04: G3 Relative humidity 5 to 95 %, non-condensing Maximum ambient temperature 55 °C (131 °F), maximum ambient temperature 40 °C (104 °F) for vertical installation of compact MTUFrequently asked questions about the product are as follows: -What is ABB DO810? ABB DO810 is a digital output processor module that converts digital output signals into relay control signals, etc., to control various devices and actuators. -What are its main features? It has 16 digital output channels, an output voltage range of 10 to 30 volts, and a maximum continuous output current of 0.5A. Each output channel includes a short-circuit and overheat protection high-side driver, EMC protection components, inductive load suppression, output status indicator LED and optoelectronic isolation barrier, and the output is divided into two separately isolated groups, each with eight output channels and a voltage monitoring input, with programmable functions, multiple communication interfaces and diagnostic functions. -What is the main function of the DO810 module? The main function is to convert digital output signals into relay control signals, thereby controlling various devices and actuators such as motors, valves, lights, alarms, etc. to achieve process control.